Labels:text | font | number | parallel | screenshot | document | black and white | receipt | line OCR: CRUISE CONTROL DOES NOT OPERATE PROPERLY TEST RESULT ACTION 1. Disconnect Cruise Control Module Test lamp lights. GO to step 2. Connector. Place the Ignition Test lamp does not light. Switch in the RUN position. LOCATE and REPAIR open in BRN Connect a test lamp from BRN (41) wire between Fuse Block and (41) wire at Cruise Control Cruise Control Module, Module to ground. 2. Connect a test lamp from BRN Test lamp lights. GO to step 3. (41) wire to BLK (550) wire at Cruise Control Module. Test lamp does not light. LOCATE and REPAIR open in BLK (550) wire between Cruise Control Module and Ground G101. 3. Connect a test lamp from GRY |Test lamp lights. GO to step 5. (397) wire at Cruise Control Module to ground. Press the Test lamp does not light. GO to step 4. ON/OFF button at Cruise Control Switch. 4. Using an ohmmeter, test the GRY Continuity. REPLACE Cruise Control Switch. (397) wire for resistance between Cruise Control Switch and Cruise No continuity. LOCATE and REPAIR open in GRY Control Module. (397) wire between Cruise Control Switch and Cruise Control Module, 5. Connect a test lamp from the DK Test lamp lights. GO to step 7. BLU (84) wire at Cruise Control Module to ground. Press the Test lamp does not light. GO to step 6. SET/COAST Button at Cruise Control Switch. 6. Using an ohmmeter, test the DK Continuity. Replace Cruise Control Switch. BLU (84) wire for resistance between Cruise Control Switch No continuity. LOCATE and REPAIR open in DK and Cruise Control Module. BLU (84) wire between Cruise Control Switch and Cruise Control Module. 7. Connect a test lamp from the GRY/BLK (87) wire at the Cruise Test lamp lights. GO to step 9. Control Module to ground. Press Test lamp does not light. GO to step 8. the RESUME/ACCEL Button at Cruise Control Switch.
(.png)
